Orange and Black Bakelite Sheet: Specifications and Applications,Bakelite Sheet is widely used in transformers, switchgear, distribution equipment, motors, automation equipment,...
Bakelite Sheet, also known as phenolic laminated paper sheet or phenolic insulation sheet, is a rigid electrical insulation material made by impregnating insulating paper with phenolic resin and laminating it under controlled heat and pressure.
With good electrical insulation, mechanical strength, heat resistance, dimensional stability, and machinability, Bakelite Sheet is widely used in transformers, switchgear, distribution equipment, motors, automation equipment, electrical fixtures, and insulation structural components.
Orange and black are two common colors of Bakelite Sheet. However, color itself does not normally determine the performance or quality of the material. When selecting Bakelite Sheet, users should focus on the material grade, thickness, density, electrical properties, mechanical strength, and actual operating conditions.

Bakelite Sheet is generally manufactured using bleached kraft paper or other insulating paper as the reinforcement material and phenolic resin as the binder. After resin impregnation, the paper is stacked and laminated under controlled temperature and pressure to form a dense and rigid insulation sheet.
Typical characteristics of Bakelite Sheet include:
The actual performance of Bakelite Sheet depends on factors such as the resin system, type of reinforcing paper, lamination process, density, thickness, and material grade. For high-voltage, high-temperature, or high-mechanical-load applications, the material should be selected according to the specific technical requirements.

Orange and black are two commonly available colors of Bakelite Sheet. For products manufactured to the same material grade, color itself generally does not determine the electrical or mechanical performance of the material.
Orange Bakelite Sheet has a highly visible appearance, making insulation components easier to identify inside electrical equipment and complex machinery.
Typical applications include:
Black Bakelite Sheet provides a relatively neutral appearance and is commonly used for equipment components where a clean and consistent appearance is preferred.
Typical applications include:
Therefore, orange and black Bakelite Sheet should not simply be considered different performance grades. When the two products are manufactured according to the same material specification, technical parameters are more important than color when selecting the appropriate material.
Bakelite Sheet can be supplied in different thicknesses, lengths, widths, and custom dimensions according to customer requirements.
Common thicknesses include:3mm/5mm/8mm/10mm/12mm/15mm/20mm
Available standard sizes may vary depending on the manufacturer and material grade. Custom dimensions can also be supplied according to specific application requirements.
For small-size or non-standard applications, Bakelite Sheet can be cut into dimensions such as:
For components requiring holes, slots, chamfers, or irregular contours, customers are recommended to provide CAD drawings or detailed dimensional requirements. This allows the appropriate sheet thickness and machining allowance to be determined before production.
For example, if the required finished dimension is 95 × 195 mm, a slightly larger Bakelite Sheet can be selected as the machining blank and then cut or milled to the final dimensions.
Because of its combination of electrical insulation, mechanical strength, and machinability, Bakelite Sheet is widely used in electrical equipment and industrial manufacturing.
Bakelite Sheet can be used in switchgear, distribution cabinets, busbar systems, and other electrical equipment for:

In certain transformers, motors, and other electrical equipment, Bakelite Sheet can be used to manufacture insulation spacers, support components, structural parts, and tooling fixtures.
For oil-immersed transformer applications, material selection should also take into consideration insulating-oil compatibility, moisture absorption, mechanical strength, operating temperature, and long-term dimensional stability.
Therefore, Bakelite Sheet for transformer applications should not be selected based solely on color or thickness.
Bakelite Sheet combines electrical insulation, adequate mechanical strength, and good machinability, making it suitable for:
It is particularly suitable for applications that require a combination of electrical insulation, mechanical support, and easy machining.
Bakelite Sheet is a rigid thermoset material. Although it can be processed using conventional machining methods, its relatively brittle structure means that improper machining parameters may cause edge chipping, burrs, or localized delamination.
Suitable carbide saw blades are recommended for cutting Bakelite Sheet. A stable feed rate should be maintained, and cutting parameters should be adjusted according to the sheet thickness and machining equipment.
When drilling Bakelite Sheet, use suitable drill bits and appropriate cutting speeds. Properly supporting the workpiece can help reduce edge chipping and improve hole quality.
CNC milling is suitable for irregular insulation components, precision structural parts, and components with multiple holes or slots.
Before machining, customers should confirm the required dimensions, tolerances, hole diameters, slot dimensions, chamfers, and surface requirements according to the technical drawing.
Machining dust should also be properly controlled. Appropriate personal protective equipment and adequate workplace ventilation are recommended during processing.
When selecting Bakelite Sheet, it is recommended not to judge the material only by its color or price. The selection should be based on the actual application and operating conditions:
Application Environment → Electrical Requirements → Operating Temperature → Mechanical Load → Sheet Thickness → Material Grade → Machining Requirements
For conventional electrical equipment, key factors include electrical insulation, mechanical strength, dimensional stability, and thickness.
For applications involving high temperature, high voltage, prolonged exposure to moisture, or special media, additional properties such as thermal resistance, moisture resistance, dielectric strength, and chemical compatibility should be evaluated.
For custom-machined Bakelite insulation components, customers should provide the required sheet thickness, finished dimensions, tolerances, hole positions, slots, chamfers, and quantity in advance. This enables the manufacturer to recommend the appropriate raw material and machining process.
Orange and black Bakelite Sheet are both widely used phenolic-based electrical insulation materials. For products manufactured to the same material grade, color is generally a matter of appearance and identification rather than a direct indicator of material performance.
For electrical insulation, equipment structural components, automation fixtures, and industrial machining applications, the most important factors are the material grade, thickness, mechanical properties, electrical properties, and actual operating conditions.
If you are looking for Bakelite Sheet, Bakelite insulation parts, or custom-machined Bakelite components, please provide details such as the dimensions, thickness, quantity, operating temperature, and application.
As a professional electrical insulation material manufacturer, Xujue Electrical can provide Bakelite Sheet and customized insulation components according to different electrical and industrial application requirements.
If you are interested in our products,, please send us a message and we will contact you as soon as we receive it. Email: info@ztaero.com whatsApp: +8616650273778
If you are attractive to our products, please send us a message and we will contact you as soon as we receive it.