Technical article

Home > News > Technical article >

What problems should be paid attention to when installing dry-type transformers?

Time: 2020-07-30 11:08    Auther: Ztelec group

The choice of dry-type transformer is very important, as is the installation process. A reasonable installation of the transformer can save a lot of trouble for future work.

The use and installation of dry-type transformers is an important part. if the installation is not good will naturally affect everyone's electricity, and even will affect the whole piece, the whole area of residential electricity, so in the installation above, to ask the electrician to operate, and don’t let people who don’t know how to do it at will.

Before installation, it is important to carry out a small-environment safety installation, that is, to temporarily close the circuit in an area through a switch, and to create a safe environment without electricity for the operator before the installation can be carried out. This is important, It cannot be installed without power on.

At the same time, in the process of installation, pay attention to a careful and flexible change in the actual application of the transformer. For example, if a dry-type transformer is used alone or in a group, their line distribution is different. Everyone should install it. Pull the wire according to the actual situation.

After the installation is complete, it cannot be powered on immediately. Instead, a spare small power supply should be used for a test. Use a capacitor pen to test the input and output voltage of the transformer, and it has reached the standard performance, the installation is normal, and the function is normal. After that, the entire installation can be ended.

And please pay attention to protect it during use.

CONTACT EMAIL PHONE INQUIRY