Online service:+8613137718313

Home > Service > Case

Customers From Mali Get this Epoxy Rod Sample

time:2019-12-23 14:03:01 Author:

This case is about the customers from Mali, who want this epoxy rod for the transformers insulation, we supply him the free sample.

 Welcome to our customers in Mali, who want this epoxy rod, also used in the insulation of transformers. What exactly is an epoxy stick? Customers who have not been in contact may not be very clear, we can take this opportunity to introduce you.

 Epoxy rod is an electro-alkali-free fiber glass cloth immersed in epoxy resin, after baking, molding mold after heat pressure processing into a circular cross-section of the rod glass cloth rod has a high mechanical properties.
epoxy rod
Application characteristics of epoxy rods:  
 1, the form is diverse. A variety of resins, curing agents, modifiers system can be almost adapted to a variety of applications of the form of the requirements, the range can be from very low viscosity to high melting point solids.  
 2, curing is convenient. With a variety of curing agents, epoxy resin systems can be cured in a temperature range of 0 to 180 degrees C.  
 3, strong adhesion force. The presence of polar hydroxyl and ether bonds inherent in the cyclosine molecular chain makes it highly adhesion to various substances. Epoxy resins are cured with low shrinkage and low internal stress, which also helps to increase adhesion strength. 
 4, low shrinkage. The reaction of epoxy resins and the curing agents used is carried out by directly adding reactions or open-loop polymerization reactions of epoxy-based elements of resin molecules, without water or other volatile by-products released. Compared with unsaturated polyester resins and phenolic resins, they show very low shrinkage (less than 2%) during curing.  
 5, mechanical properties. The cured epoxy resin system has excellent mechanical properties.
 Malian customers had previously purchased epoxy rods at other manufacturers, but decided to switch to a new supplier because the insulation parameters did not quite match their needs. The customer is very satisfied with the product, we have arranged ready-made samples sent to the customer's factory, and then do an insulation test. Cooperation is basically reached. Thanks to the customer's trust!
epoxy rod