Features of Hermatically Sealed Oil-immersed Transformer S11-M-30～2500/10:
The 3-phase oil-immersed distribution transformer produced by our company adopts newly-designed insulation structure for transformer body so as to improve its short circuit resistance capability. The iron core is made of high quality cold-rolled silicon steel sheet, and the winding group uses multi-layered cylinder structure or foil-type structure. Its all fasteners are processed by special anti-loosing treatment. This product is one of high-tech products widely promoted by the nation due to its higher efficiency and lower loss,it is helpful to save a great deal of power consumption and running cost, and bring great social benefits.
Load Nature of Hermatically Sealed Oil-immersed Transformer S11-M-30～2500/10:
1, there are a large number of first- or second-level load, it is advisable to install two or more transformers, when any of the transformers disconnected, the remaining transformer capacity can meet the first- and second-level load of electricity. First, secondary load as much concentration, should not be too scattered.
2, seasonal load capacity is large, it is advisable to install a special transformer. Such as large-scale civil buildings in the air-conditioning freezer load, heating and electricity heat load.
3, when the concentrated load is large, it is advisable to install a special transformer. Such as large-scale heating equipment, large X-ray machines, arc furnaces and so on.
4, when the lighting load is large or the use of a common transformer and lighting seriously affect the lighting quality and lamp life, can be set up a special lighting transformer. In general, power and lighting share transformers.
Use Environment of Hermatically Sealed Oil-immersed Transformer S11-M-30～2500/10:
Under normal media conditions, oil-immersed transformers or dry transformers can be used, such as industrial and mining enterprises, agricultural independent or attached substations, community independent substations, etc. The transformers to choose from are S8, S9, S10, SC (B)9, SC (B)10, etc.
Temperature Environment for Hermatically Sealed Oil-immersed Transformer S11-M-30～2500/10:
1, At 220 degrees C temperature, to maintain long-term stability
2, At 350 degrees C temperature, can withstand short-term operation
3, In a wide range of temperature and humidity, to maintain stable performance
4, At a temperature of 250 degrees C, will not melt, flow and fuel
5, At a temperature of 750 degrees C, will not release toxic or corrosive gases
Leave a message
ZTELEC PRODUCT DISPLAY
- Power Transformers
- Transmission And Distribution Series
- Mining Explosion-proof Transformer
- Special-purpose Transformer
- Oil-immersed Transformer
- Dry-type Transformer
- Electrical Insulation Material
- Laminated insulation board
- Laminated insulation tube
- Electrical Insulation Rod
- Electrical Insulation Paper
- Flexible insulating film
- Insulating Fiber Glass products
- Insulating Varnish, Resin
- Enamel Insulated Wire
- Paper Covered Wire
- Enameled Flat Wire
- Enameled Round Wire