logo
Tel:0086-371-67120632

Home > Products > Electrical Insulation Material > Electrical Insulation Rod 

Epoxy Resin Laminated Fiber Glass Pultruded Rod

Epoxy Resin Laminated Fiber Glass Pultruded Rod
Epoxy Resin Laminated Fiber Glass Pultruded Rod
Epoxy Resin Laminated Fiber Glass Pultruded Rod

 I. Define and purpose
Glass fiber is mainly made of SiO2, MgO2, Na2O, CaO, etc. According to the amount of alkali, it can be classified into three kinds: non-alkali glass fiber, mid-alkali glass fiber and high-alkali glass fiber. It is mainly used as insulation material, wet-proof material and noise reduction material.
II. Technical requirement for surface
The surface of laminated rod should be flat and smooth, no bubble, no wrinkle, no delamination or crackle, and properly free from other defects such as scrape, impress, dirty spot and uneven color, but a little color patches is allowed.
Ⅲ. Characteristics
The Glass Fiber Rod is commonly used. It is very stiff and strong with low water absorption and flame retardant. What’s more, it has other advantages, such as extremely durable, good dimensional stability, good heat resistance, good mechanical properties and so on.
VI. Application
Solid glass fiber rods have thousands of industrial, commercial and recreational uses. Because they are not electrically conductive, they are a great material for antennas. Glass fiber rods are frequently used as a strengthening core in applications where conductivity is an issue, as standoffs and for kite framework. In addition, glass fiber rods are used as flexible framing for outdoor structures such as tents and small greenhouses. They are inexpensive, offer a high strength-to-weight ratio, flexible and extremely durable.

Parameter

Specification

Item

Density

≥2.1g/cm3

Water Absorption

<0.10%

Tensile Strength

≥1200Mpa

Bending Strength

≥900Mpa

Compressive Strength(axial)

≥680Mpa

Water Diffusion Test 1min

12KV

Leakage Current

<1mA

Dye Penetration

Pass after 15mins

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.

SUPPORT

SERVICE SUPPORT

Zhongtian Electric provides a perfect after-service system.
There are more than 60 engineers can provide our customers with comprehensive pre-sale, in-sale and after-sale service.

  • Pre-sale service: To provide technology consultation and knowledge support of products.

  • In-sale service: Full communication with customers, providing customers with the best products and technology with most suitable solutions.

  • After-sale service: Follow up the installation and use of product promptly to guarantee the product quality

product

leave a message

We will contact you within 24 hours,You can also click on the online customer service.Chat Online

*Message:
Asterisks are required information.

Copyright:2014 ZTELEC ELECTRIC TECHNOLOGY (ZHENGZHOU) CO.,LTD. All Rights Reserved.